Skip to main content
DoneThatDoneThat

Cost of hiring calculator: in office, hybrid and remote

Work out what a new hire really costs: recruiting, the empty seat, the months before they are fully productive, colleagues' time and a place to work. Every default has a source.

Cost per hire and time to hire: the current figures

Each figure says whether it is a median or an average, the year and who was counted. Last checked 18 November 2026.

Cost per hire, median (SHRM 2025)
$1,200 non-executive, $10,625 executive
2,371 SHRM members, US, surveyed January 9 to March 3, 2025. SHRM 2025 Recruiting Executives Benchmarking data brief
Cost per hire, average (SHRM 2025)
$5,475 non-executive, $35,879 executive
Same survey. The average sits far above the median because a few very expensive hires pull it up. SHRM press release, October 15, 2025
Time to fill, median (SHRM 2025)
44 days non-executive, 45 days executive
Calendar days from opening the requisition to the accepted offer. Same survey. SHRM 2025 Recruiting Executives Benchmarking data brief
Time to hire, median (SmartRecruiters 2025-2026)
38 days worldwide, 35 days in the US
Applicant tracking data from September 2023 to August 2024: 89 million applications for 1.5 million jobs in 95 countries. SmartRecruiters Recruiting Benchmarks 2025-2026
Cost to replace an employee (Gallup 2019)
One-half to two times their annual salary
Gallup's estimate, which it calls conservative. A range, not a measured average. Gallup, March 13, 2019

These are recruiting costs only. The bigger cost comes after the start date: the months before a new hire is fully productive. The calculator below adds it up, for a hire in the office, hybrid or remote.

Work arrangement

Picks the result on the right. The table under the calculator shows all three side by side.

The role

Role level

Fills in the recruiting cost, days to fill and ramp-up below. Change any of them after.

Starts at $60,000 as an example. Enter the salary for the role.

%

70% in US private industry (BLS, June 2026), so benefits and employer taxes add about 43% on top of salary.

The defaults are US figures in dollars. Changing the currency changes the symbol only, not the numbers.

Recruiting

SHRM 2025 median cost per hire for non-executive roles. Use your own spend on ads, agencies and recruiter time if you know it.

days

SHRM 2025 median for non-executive roles, in calendar days from opening the job to the accepted offer.

The work that doesn't get done while you hire, valued at what the role costs you. Off by default, because the pay you don't spend while the seat is empty offsets part of it.

Ramp-up

The defaults are 8 weeks for clerical jobs, 20 for professionals and 26 for executives, from a 2003 study by Mellon quoted in MIT Sloan Management Review (2005). They are about 20 years old, and no newer study measures it. No study gives a reliable difference between office, hybrid and remote, so all three start the same; set your own.

%

Your assumption. 0% draws a straight line from no output on day one to full output at the end of the ramp-up.

Colleague and manager time

Your own estimate. No reliable benchmark exists for the hours colleagues and managers spend onboarding a new hire, so this starts empty and is not counted until you fill it in.

hours

Training sessions, pairing, answering questions and reviewing work, added up across everyone who helps.

Leave empty to use the new hire's salary. Turned into an hourly cost over 2,080 paid hours a year.

Training

US employers spent $874 per learner in 2025 (Training magazine, organizations with 100 or more employees). That is spend on all staff, not new hires only.

Place to work

One desk with its share of meeting rooms, walkways and the building, at CBRE’s US average asking rent (Q3 2026), from the defaults of our office space calculator.

With shared desks sized to the busiest day, a hybrid hire takes up 72% of a desk.

$888 is the average yearly maximum among US employers that fund home office equipment (SHRM, 2025). More in our work from home stipend guide.

Your assumption, for internet or a coworking desk. No survey figure exists, so it starts empty.

A laptop and software cost the same wherever the hire works, so they are left out.

Break-even (optional)

%

Your assumption; no source gives one. 150% means each dollar of pay and benefits brings back $1.50 of work once the hire is up to speed. It has to be above 100% for a hire to break even.

Your new hire, in office

Total cost of the new hire

$25,829

On top of salary in the first year. About 3.6 months of the role's pay and benefits ($85,714 a year).

Breaks even

Enter what the work is worth

Fill in the value of the work under Break-even to see the month.

Fully productive after

20 weeks

About month 5 after the start date.

Recruiting
$1,200
Empty seat
Not counted
Ramp-up productivity gap
$16,484
Colleague and manager time
Not counted
Training
$874
Place to work, first year
$7,271
Total
$25,829

Everything is calculated in your browser. Nothing you enter is stored or sent anywhere.

In office, hybrid or remote

The same hire and the same settings. Only the place to work and the ramp-up weeks you set change between the columns.

Cost of a new hire in the office, hybrid and remote
Cost lineIn officeHybridRemote
Recruiting$1,200$1,200$1,200
Empty seat$0$0$0
Weeks to full productivity202020
Ramp-up productivity gap$16,484$16,484$16,484
Colleague and manager time$0$0$0
Training$874$874$874
Share of a desk100%72%0%
Desk rent, first year$7,271$5,235$0
Home-office budget and stipend$0$888$888
Total cost of the new hire$25,829$24,681$19,446
Months of pay and benefits3.63.52.7
Breaks evenEnter what the work is worthEnter what the work is worthEnter what the work is worth

The commute is the employee’s cost, not yours, so it is not in this table. The commute cost calculator puts a number on it.

See how a new hire's first months are going

DoneThat turns each person's workday into a summary they choose to share with the team, so you can follow a new hire's ramp-up without monitoring software. Summary level and opt-in, and screenshots are never stored.

Desktop app for Windows, macOS and Linux. 14-day free trial.

How the cost of hiring calculator works

A cost-per-hire figure counts what it takes to fill the seat: ads, agencies, recruiter time. It stops on the start date. Most of the cost of a new hire comes after that, while they learn the job and you pay full salary for part of the output. The calculator adds both, plus a place to work, which is where in office, hybrid and remote differ:

Pay and benefits

salary ÷ wages' share of total compensation (70% by default)

Recruiting

the cost per hire you enter (SHRM 2025 median by default)

Empty seat, if you count it

pay and benefits ÷ 365 × days to fill × share of the work left undone

Ramp-up productivity gap

pay and benefits per week × weeks to full productivity × (1 - productivity in week one) ÷ 2, counting only the first 52 weeks if ramp-up runs longer

Colleague and manager time

hours per week × weeks to full productivity (up to 52) × their pay and benefits ÷ 2,080 hours

Training

the first-year figure you enter

Place to work, first year

desk rent × share of a desk (1 in office, busiest-day share for hybrid, 0 remote) + home-office budget (hybrid and remote) + monthly stipend × 12 (remote)

Total cost of the new hire

the six lines above, added up

In plain words: the ramp-up assumes the new hire’s output rises in a straight line, from what they manage in week one to full speed at the end of the ramp-up. You pay full pay and benefits throughout, so the gap is the triangle between the two, half the weeks at full cost if they start from zero. Colleagues’ time is counted for the same weeks. The empty seat is off by default: it counts the work that isn’t done while you hire, but you are also not paying anyone for that seat, so whether it is a real cost depends on the role.

Break-even needs one more number that no study gives: what a fully productive year of the role’s work is worth to you, compared with its pay and benefits. Enter it and the calculator finds the first month in which the value of everything the hire has done covers their pay, their workspace, the colleague time and the one-off costs. If the work is worth exactly what you pay for it, a hire never breaks even, which is why the figure has to be above 100%.

A worked example

The calculator starts with a professional on a $60,000 salary. Wages are 70% of total compensation in US private industry, so pay and benefits come to $85,714 a year, or $1,648 a week. Recruiting at SHRM’s 2025 median costs $1,200. A professional takes about 20 weeks to reach full speed, so the ramp-up gap is $1,648 × 20 ÷ 2 = $16,484. Training adds $874. In the office, a desk for a year adds $7,271, for a total of $25,829, about 3.6 months of the role’s pay and benefits. Hybrid at three office days a week costs $24,681 ($6,123 for a share of a desk plus a home-office budget), and remote $19,446 ($888 for the home-office budget). Counting the empty seat for 44 days would add $10,333 to each.

In this example the ramp-up gap is more than ten times the recruiting fee, and it is the one line no invoice shows.

In office, hybrid or remote: what changes

  • Workspace. An office hire needs a desk all year. The default, about $7,271 a year, is one desk with its share of meeting rooms, walkways and the building at CBRE’s US average asking rent, taken from our office space calculator. A hybrid hire uses part of a desk, because shared desks are sized for the busiest day, not for everyone.
  • Home office. In SHRM’s 2025 benefits survey of 3,969 US organizations, 55% of employers subsidized home office equipment, with an average annual maximum of $888 among those that did. Our work from home stipend guide compares that with published company budgets. A monthly stipend for internet or coworking has no survey figure, so it starts empty.
  • Ramp-up. No study gives a reliable figure for how much longer a remote hire takes to get up to speed, so the calculator starts all three at the same number. The evidence points one way for juniors. At a Fortune 500 firm, engineers whose team sat in one building got 22% more comments on their code than those on teams spread across buildings, and junior engineers were the main beneficiaries. Sitting together also cut monthly program output by 23%, more for senior engineers (NBER Digest, February 2024). If you hire juniors into a remote team, consider a longer ramp-up, and plan the pairing and feedback that the office would otherwise provide.
  • Recruiting reach. In March 2026, remote jobs were 9% of US paid job postings on LinkedIn but drew 37% of applications and 31% of views, down from 41% of applications a year earlier (LinkedIn Economic Graph, April 2026). More applicants is not the same as a cheaper hire, so the calculator does not change the recruiting cost for remote roles.
  • The commute. It costs the employee, not you, so it is not in the total. The commute cost calculator puts a number on it. For the wider choice, read hybrid vs remote work.

How long until a new hire is productive?

The figures everyone quotes are old. A 2003 study by Mellon found that external hires took about 8 weeks to reach full productivity in clerical jobs, 20 weeks as professionals and more than 26 weeks as executives. It is known through an article in MIT Sloan Management Review (Winter 2005); the study itself is not public. The same source puts lost productivity during ramp-up at 1% to 2.5% of total revenue. Gallup wrote in 2021 that, in its experience, new employees typically take around 12 months to reach peak performance (Gallup). That is experience, not a measured study. The calculator uses the Mellon weeks as defaults because they are the only figures split by role. Replace them with your own when you have them.

Ramp-up is the biggest cost, and the hardest to see

Recruiting arrives as an invoice. Ramp-up doesn’t: it is spread across months of normal-looking weeks, for the new hire and for the people helping them, and remote makes it harder still to tell how those weeks are going. DoneThat writes a daily summary of each person’s work, reconstructed from their screen and app activity, and the person decides whether to share it with the team. A manager sees what a new hire is working on and where they get stuck, with no stored screenshots and no minute-by-minute monitoring. See how DoneThat works.

Where the old numbers came from

Several cost-of-hiring figures are still widely quoted online long after their sources moved on. Some were misdated or misquoted along the way. Here is where each one really came from, and what to use instead.

Outdated cost-of-hiring figures, their real origin and current replacements
Figure still quotedWhere it came fromUse instead
$4,129 cost per hire, often dated 2019SHRM's 2016 Human Capital Benchmarking report, which covered fiscal 2015.SHRM 2025: median $1,200 non-executive ($10,625 executive); average $5,475 ($35,879 executive).
$4,700 cost per hire, often dated 2023SHRM's Talent Access benchmark from 2022, an average of $4,683. The 2022 median was $1,244.SHRM 2025, as above. Say whether a figure is a median or an average.
42 or 44 days to fill a job42 days is from the same 2016 SHRM report. 44 days was SHRM's 2022 median for non-executive roles.SHRM 2025 median: 44 days non-executive, 45 executive. SmartRecruiters 2025-2026 median time to hire: 38 days worldwide, 35 in the US.
52 days and about $4,000 to hireThe Bersin by Deloitte 2015 Talent Acquisition Factbook, passed on through a 2016 Glassdoor post.As above. For tech and startup roles, Ashby's data (January 2021 to March 2026) gives a median of 52 days to first fill for junior roles, 63 for mid-level and 71 for senior.
1% to 2.5% of revenue lost to ramp-upThe Mellon Learning Curve Research Study (2003), as quoted in MIT Sloan Management Review in 2005. The original study is not public.Still the only source for this figure. Quote it with its date.
1.5 to 2 times salary to replace an employeeA misquote of Gallup (2019).Gallup's own wording: one-half to two times the employee's annual salary.
$16,999 to hire one employeeA worked example in a hiring-cost article that has since been taken down. Its arithmetic had errors.Not a statistic. Run your own numbers in the calculator above.

SHRM itself now leads with medians, because averages are pulled up by a few very expensive searches (SHRM 2025 data brief). Whatever you quote, say whether it is a median or an average, and give the year.

Sources for the defaults

The calculator’s defaults and their sources
InputDefault or figureWho and whenSource
Recruiting costMedian $1,200 non-executive, $10,625 executive. Average $5,475 and $35,8792,371 SHRM members, US, January to March 2025, unweightedSHRM 2025 Recruiting Executives Benchmarking (data brief and press release)
Days to fillMedian 44 days non-executive, 45 executiveSame survey; calendar days from requisition to accepted offerSHRM 2025 Recruiting Executives Benchmarking data brief
Wages as a share of total compensation70%, so benefits and employer taxes are 30%US private industry, June 2026BLS Employer Costs for Employee Compensation
Weeks to full productivity8 clerical, 20 professional, more than 26 executiveExternal hires; Mellon Learning Curve Research Study, 2003. About 20 years oldRollag, Parise and Cross, MIT Sloan Management Review, Winter 2005
Training$874 per learner per year (40 hours)US organizations with 100 or more employees, April to July 2025, weightedTraining magazine, 2025 Training Industry Report
Desk rent per year$7,271: 192 rentable sq ft per desk at $37.95 per sq ftUS national average asking rent, Q3 2026; desk area from the office space calculator's mixed layoutCBRE, via our office space calculator
Hybrid share of a desk3 office days ÷ 5 × 1.2 for the busiest day = 72% of a deskKastle badge data, US, October 2026, via our office space calculatorOffice space calculator
Home-office budget$888, the average annual maximum among the 55% of employers that subsidize home office equipment3,969 US organizations, January to March 2025, unweightedSHRM 2025 Employee Benefits Survey

Three inputs have no source and start empty or at a stated convention: colleague and manager hours, the remote stipend and the value of the work. The salary of $60,000 is an example, not a benchmark.

Our defaults, the formulas and the two tables above are free to use under CC BY 4.0 with a link to this page. The figures from SHRM, SmartRecruiters, Gallup and the other publishers remain theirs: cite them with attribution to the original source, as this page does.

Written and maintained by the DoneThat team. The formulas match the calculator code, and every figure above was last checked against its source on 18 November 2026. This is a planning estimate, not professional advice.

Frequently asked questions

What is the average cost per hire?

In SHRM's 2025 benchmarking survey of 2,371 US members, the average cost per hire was $5,475 for non-executive roles and $35,879 for executives. The medians were much lower: $1,200 and $10,625. A few very expensive searches pull the average up, so the median is closer to what a typical hire costs. Both count recruiting costs only, not the months before a new hire is fully productive.

How long does it take to hire someone?

SHRM's 2025 median time to fill was 44 calendar days for non-executive roles and 45 for executives, counted from opening the requisition to the accepted offer. SmartRecruiters' applicant tracking data for September 2023 to August 2024 gives a median time to hire of 38 days worldwide and 35 in the US. Tech roles take longer: Ashby's data puts the median at 52 days to first fill for junior roles and 71 for senior ones.

How do you calculate the cost of a new hire?

Add five things: the recruiting cost, the work lost while the seat is empty, the productivity gap while the new hire ramps up, the hours colleagues and managers spend helping, and training. Then add a place to work for the first year, which depends on whether the hire works in the office, hybrid or remote. With this calculator's defaults, a professional on a $60,000 salary working in the office costs about $25,829 on top of salary in the first year, and $16,484 of that is the ramp-up gap.

How long until a new hire is fully productive?

The most quoted figures are old: a 2003 study by Mellon, quoted in MIT Sloan Management Review in 2005, found external hires took about 8 weeks to reach full productivity in clerical jobs, 20 weeks for professionals and more than 26 weeks for executives. Gallup wrote in 2021 that, in its experience, new employees typically take around 12 months to reach peak performance. That is experience, not a measured study. No recent study measures it directly.

Does it cost more to hire a remote employee?

It costs less in workspace and about the same to recruit. At the defaults, a desk for a year comes to about $7,271 in US office rent, while SHRM's 2025 benefits survey puts the average annual maximum for home office equipment at $888, among employers that pay one. No study gives a reliable figure for how much longer a remote hire takes to ramp up. One study of engineers at a Fortune 500 firm found that those whose team sat together got 22% more comments on their code, with junior engineers benefiting most, so the calculator lets you set ramp-up separately for each arrangement.

How much does it cost to replace an employee?

Gallup estimated in 2019 that replacing an employee costs one-half to two times their annual salary, and called that a conservative estimate. The figure is often misquoted as 1.5 to 2 times. It is a range, not a measured average, so use the calculator for your own role.

Does the cost of hiring calculator save what I enter?

No. Everything is calculated in your browser and nothing you type is stored or sent anywhere, so the numbers are gone when you close the page.